http://www.tyan.com
34
an external battery is 2 years. If yours is running low, you will need to replace it
with a new 3V lithium battery (Sony CR2032).
Flash EEPROM
The Tigercub 100 uses flash memory to store BIOS programs. It can be
updated as new versions of the BIOS become available. You can upgrade your
BIOS easily using the flash utility (see page 69).
RAM Installation
The Tigercub 100 uses a 64-bit data path from memory to CPU and can
accommodate up to 768MB of SDRAM. The 168-pin DIMMs must be of the
3.3V,
unbuffered
variety. The position of the notch in the DRAM key position
will tell you whether or not a DIMM is unbuffered (see the figure below). All
installed memory will be automatically detected, so there is no need to set any
jumpers.
Some details of memory installation:
One unbuffered DIMM must be installed for the system to POST.
The mainboard supports 8MB, 16MB, 32MB, 64MB, and 128MB SDRAM
DIMM modules.
Chapter 3
Onboard Resource Settings
RFU
Buffered
Unbuffered
168-pin DIMM
All manuals and user guides at all-guides.com