background image

Wireless Access Point  Model 0-1591700-x          User Manual 

Page 6 of 33  

Disclaimer 

Tyco Electronics makes no representation or warranties with respect to the contents hereof and 
specifically disclaims any implied warranties or merchantability or fitness for any particular 
purpose. Further, Tyco Electronics reserves the right to revise this publication and make changes 
from time-to-time in the content hereof without obligation of Tyco Electronics to notify any person of 
such revision or changes. 

Support 

The access point is a high performance unit with a very strong feature set. Please carefully check 
the manual and the settings of associated equipment before calling for technical support. When 
requesting support, please have your proof-of-purchase documentation available.  
 
The first line of support is via the Tyco Electronics web site at 

www.lan-electronics.com

 where 

further support information and frequently asked questions are located. If you are still unable to 
solve the problem then there is a web contact form at 

www.lan-electronics.com/support.htm

 that 

will assist you in placing the query with us. Please fill in all the fields and provide us with as much 
information as possible to assist us in getting a suitable answer to you. The estimated turn-round 
time for support requests is 1-2 working days.  
 
Partner level clients may participate in a 24 x 5 telephone helpdesk support scheme. 

Warranty 

Full details of the generic warranty scheme are available on the web site at:- 

http://www.lan-electronics.com/support.htm

 
Tyco Electronics

 

(Active LAN Products)

 

warrants this Wireless LAN Access Point product to be 

free from defects in material and workmanship, under normal use and operation for a period of 2 
years product from the date of purchase from an authorised vendor, subject to the conditions and 
exclusions below:- 
 

1.  This warranty does not cover any damage to the products that resulted from accident, 

abuse, misuse, natural or personal disaster, or any unauthorised disassembly or 
modification, or operation in a manner contrary to the instructions, or shipment of the 
product to the Tyco Support Centre. 

 

2.  The products are not designed, manufactured or intended for use in hazardous or critical 

environments or in activities requiring emergency or fail-safe operation or in any other 
activity or application in which failure of the product may pose the risk of physical injury or 
death or environmental harm. Tyco Electronics (Active LAN Products)

 

specifically disclaims 

any express or implied warranty of fitness for any dangerous application.  

 

3.  Except for the foregoing express limited warranty, Tyco makes no other warranty, statutory, 

express or implied, including, but not limited to, warranties of merchantability or fitness for a 
particular purpose. 

 

4. Tyco Electronics

 

(Active LAN Products)

 

offers a two-year standard warranty to external 

power supply. This standard warranty commences from the date that the end Customer 
purchases the unit from an authorised vendor. 

 

Submitting A Warranty Claim 

Use the Tyco web-based form at 

http://www.lan-electronics.com/returns_form_normal.htm

 

when 

submitting a warranty claim. 

 PL0356                                                     ©2003TycoElectronics                                        Issue 1 

Summary of Contents for 0-1591700-x


































Reviews: