409-10016
ELT Machine 1338600-[]
Rev H
5 of 34
Tyco Electronics Corporation
Quick–Disconnect Coupling 23238–1 is required to run air–feed applicators.
End–feed and side–feed miniature applicators are easily installed and removed without repositioning the
applicator mounting plate on the machine. An optional precision adjustment feature is available for the machine
to provide quick and accurate crimp height adjustments.
Refer to Section 7, MACHINE OPTIONS for more ELT machine options.
ORIGINAL APPLICATOR
FEED TYPE
CHANGEOVER CAMS FOR ELT MACHINE
ORIGINAL APPLICATOR
FEED TYPE
1338600-1, -2, -5, and -6
1338600-3, -4
1
1
/
8
-in. Stroke Applicator for
Pre-Feed
690602-6
Ċ
/
8
pp
Model K" Terminating Machine
Post-Feed
690501-4
Ċ
1
5
/
8
-in. Stroke Applicator for
Model T" and Model G" Terminating
Pre-Feed
Ċ
690602-5
Model T" and Model G" Terminating
Machines
Post-Feed
Ċ
690501-3
Heavy-Duty Industrial (HD-I) Applicator
Pre-Feed/Post-Feed
Refer to the HD-I Applicator customer drawing for part numbers.
Figure 3
2.1. Functional Description
The ELT machine provides the force required to crimp terminals in the applicator. A terminal is attached to the
wire by placing the wire in the crimp area and pressing the foot switch. The machine consists of four functional
areas:
1. The
motor group includes a dc motor which drives a crankshaft. The motor is activated each cycle
and rotates the crankshaft one full revolution. A motor access cover, located on the end of the motor,
covers a hex key which allows the motor to be cycled manually. See Figure 4.
Figure 4
DC Motor
Crankshaft
Motor Access Cover