409-10016
ELT Machine 1338600-[ ]
Rev H
7 of 34
Tyco Electronics Corporation
A main power switch/circuit breaker (Figure 7) is located on the back of the machine. This switch connects ac
power to the control system. The CPU/motor controller is located behind the back cover of the machine. It is a
modular unit that contains all of the electronics necessary to operate the machine. See Figure 7.
The CPU/motor controller package containshigh voltageswhich can remain even after power hasbeen removed.
Contact the Tooling Assistance Center at 1-800-722-1111 for precautionary measures to follow if internal access to
the CPU/motor controller isrequired.
Figure 6
Guard Open
Icon
Green
Indicator
Yellow
Indicator
Jog Button
Speed Control
Knob
Fault
Icon
Guard Disabled
Icon
Machine Ready
Icon
Speed Control
Icon
Jog Button
Icon
Batch Counter
Kit
DANGER