6
4.2.3 Secure the cable with a tiewrap onto the cable attachment
plate.
4.3.3 Mark the tubes between the two marks on the tube holder.
4.2.4 Tighten the gland
4.3
Routing of cable fibers
4.3.1 Allocation of the tubes in the tube holders.
Important; loose tubes should be routed up to the tube holder in such
way that access to all the tubes is possible at all times in case of re-
routing without crossings of already installed tubes.
4.3.2 Open the Velcro strap and remove the FAS block cap.
4.3.3 Cut and remove the excess of the loose tube and clean the
fibers.
