background image

STAR SPRINKLER

1-2.3.21

Page 3

TABLE B

FM APPROVAL CRITERIA FOR INSTALLATION OF

8.0 K-FACTOR, SUPERNOVA S126 (SIN S1868) QR-EC HORIZONTAL SIDEWALL SPRINKLERS

NOTES:

(a) For use in QR-EC and EC Light Hazard Occupancy automatic sprinkler system applications per FM installation standards. (Maximum

room size: 1600 ft

2

(150m

2

) except for corridors protected by one row of sprinklers. Minimum fire-resistance rating of room walls: 30

minutes.).

(b) Requirement is based on maintaining both minimum flow and minimum pressure.

(c) The centerline of the sprinkler waterway (Ref. Figure 1) is to be located 4-7/16 to 12-7/16 inches (112,7 to 315,9 mm) below the ceiling.

(d) The minimum allowable spacing between the S126 Sprinklers, to prevent cold soldering, is 10 feet (3,1 m).

(e) The maximum permitted ceiling slope for S126 Sprinklers is a 1 inch (25,4 mm) rise over a 12 inch (304,8 mm) horizontal run, with

ceiling sloping downwards from the wall on which the sprinkler is located.

(f) The deflector boss to wall distance of 2 to 2-3/4 inches (50 to 70 mm) provides a heat responsive element to wall distance of

3/4 to 1-1/2 inches (20 to 40 mm.)

Application

QR-EC

(a)

Coverage Area

W x  L

FT. x FT. (m x m)

Minimum

Flow

(b)

GPM (LPM)

Minimum

Pressure

(b)

PSI (BAR)

Deflector

To Ceiling
Distance(

c)

Inches (mm)

Deflector Boss

To Wall

Distance

(f)

Inches (mm)

Sprinkler

Temperature Rating

°F

16 x 16 (4,9 x 4,9)

16 x 18 (4,9 x 5,5)

16 x 20 (4,9 x 6,1)

32 (121)

36 (136)

40 (151)

16 (1,10)

20 (1,38)

25 (1,72)

4 to 12

(100 to 300)

2 to 2-3/4
(50 to 70)

165

16 x 22 (4,9 x 6,7)

16 x 24 (4,9 x 7,3)

44 (167)

48 (182)

30 (2,06)

36 (2,48)

FIGURE 1

8.0 K-FACTOR, SUPERNOVA S126

QR-EC HORIZONTAL SIDEWALL SPRINKLER

RECESS

WRENCH

ONLY USE

SUPERNOVA

SPKR" END FOR

"SMALL FRAME

#2849

FIGURE 2

W-TYPE 11 SPRINKLER WRENCH

OBSOLETE

Summary of Contents for Star SuperNova S126

Page 1: ...at collector assembly is comprised of two link halves which are joined together by a thin layer of solder When the rated temperature is reached the sol der melts and the two link halves separate which then al lows the sprinkler to activate and flow water TECHNICAL DATA Approvals UL and ULC Listed FM Approved NYC Accepted MEA 188 99 E The approvals apply only to the service conditions indicated in ...

Page 2: ... 5 5 16 x 18 4 9 x 5 5 13 1 0 90 29 110 NOTES a For use in QR EC and EC Light Hazard Occupancy automatic sprinkler system applications per NFPA 13 b For use in EC Light Hazard Occupancy automatic sprinkler system applications per NFPA 13 c Requirement is based on minimum flow in GPM from each sprinkler The indicated residual pressures are based on the nominal K factor d The centerline of the sprin...

Page 3: ...mitted ceiling slope for S126 Sprinklers is a 1 inch 25 4 mm rise over a 12 inch 304 8 mm horizontal run with ceiling sloping downwards from the wall on which the sprinkler is located f The deflector boss to wall distance of 2 to 2 3 4 inches 50 to 70 mm provides a heat responsive element to wall distance of 3 4 to 1 1 2 inches 20 to 40 mm Application QR EC a Coverage Area W x L FT x FT m x m Mini...

Page 4: ...use and service This warranty will expire ten 10 years from date of shipment by Tyco Fire Products No warranty is given for products or components manufactured by companies not affiliated by ownership with Tyco Fire Prod ucts or for products and components which have been subject to misuse improper installation corrosion or which have not been installed maintained modified or re paired in accordan...

Reviews: