TFP800
Page 6 of 6
NATIONAL FIRE PROTECTION ASSOCIATION and NFPA are registered trademarks of National Fire Protection Association;
INCONEL is a registered trademark of Special Metals Corporation
1400 Pennbrook Parkway, Lansdale, PA 19446 | Tel1-215-362-0700
© 2018 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision date and are subject to change without notice.
P/N 49 – XXX – X – XX X
Limited
Warranty
For warranty terms and conditions, visit
www.tyco-fire.com.
Ordering
Procedure
When placing an order, indicate the
full product name and part number
(P/N). Contact your local distributor
for availability.
Type EA-1 PROTECTOSPRAY
Directional Spray Nozzle
Specify:
• (1.4, 2.8, or 5.6) K-factor orifice
• temperature rating
• finish/coating and material
• (degree) spray angle
• P/N (from Table G)
Sprinkler Wrench
Specify: W-Type 11 Sprinkler Wrench,
P/N 56-452-1-001
FINISH and MATERIAL
1
NATURAL FINISH BRONZE
6
WAX COATED BRONZE
135°F to 175°F ONLY
7
LEAD COATED BRONZE
135°F to 325°F ONLY
9
CHROME PLATED BRONZE
SPRAY ANGLE
65
65°
80
80°
95
95°
10
110°
25
125°
40
140°
60
160°
81
180°
K-FACTOR
7
K = 1.4
8
K = 2.8
9
K = 5.6
TEMPERATURE
RATING
(ALL FINISHES)
135
135°F (57°C)
175
175°F (79°C)
250
250°F (121°C)
325
325°F (163°C)
TEMPERATURE
RATING
(NATURAL
FINISH BRONZE
ONLY)
400
400°F (204°C)
500
500°F (260°C)
TABLE G
TYPE EA-1 PROTECTOSPRAY DIRECTIONAL SPRAY NOZZLES
PART NUMBER SELECTION
