TPDIN-SC48-20
MPPT Solar Controller
with Passive PoE Switch
▫
Wireless Base Stations
and Client Devices
▫
Surveillance Cameras
▫
Remote Control
▫
Remote Lighting
▫
Off Grid Electronics
Congratulations!
on your purchase of the TPDIN-SC48-20
20A MPPT Solar Controller with 7 Port Gigabit Passive PoE
Switch. Please take a moment to review this Qwik Install Guide
before use.
Operation Modes:
Solar Only operation, Solar with DC Back-
up, DC Only operation.
Key Features:
Industrial Strength, Manageable, 24VDC or
48VDC Output, 7 Gigabit Passive PoE ports, 48V 20A MPPT So-
lar, Automated Alerts, Removable Connections
Safety:
For your own protection, follow these safety rules.
▫
Perform as many functions as possible on the ground
▫
Do not attempt to install on a rainy, windy or snowy day or if
there is ice or snow accumulation at the install site or if the
site is wet.
▫
Make sure there are no people, pets, etc. below if you are
working on a roof or ladder.
Recommended Tools:
Small Flat Blade Screwdriver, Phil-
lips Screwdriver
Please help preserve the environment and return
any used batteries to an authorized depot
