3
nect the battery cable to the Large Green Connector battery inputs and
then to the batteries making sure to observe the proper polarity.
STEP 7:
Install the cable glands in the back of the enclosure and route
the long solar panel cables through the cable gland and connect to the
large green connector solar (PV) inputs. You can shorten the cables as
necessary for a cleaner install. You can also lengthen the cables by
adding additional lengths of 12AWG cable. Please note that the longer
the cable, the more cable loss you will see.
STEP 8:
Connect the solar panels in series (Positive to Negative) by
plugging the positive from panel 1 to the negative of panel 2 and then
connect the long
20’
solar cable to the remaining positive and negative
connectors from the solar panels. The connectors are keyed for polarity
so they cannot be connected incorrectly.
