8000060 Rev 1 23-Feb-18
17
c) UVI HIGH ALARM --Set UVI high alarm
d) In TEMP HIGH ALARM --Set indoor temperature high alarm
e) In HUMI HIGH ALARM --Set indoor humidity high alarm
f)
Out TEMP HIGH ALARM Set outdoor temperature high alarm
g) Out HUMI HIGH ALARM Set outdoor humidity high alarm
h) ABS BARO HIGH ALARM --Set absolute barometric pressure high alarm
i)
REL BARO HIGH ALARM --Set relatively barometric pressure high alarm
j)
WIND HIGH ALARM --Set wind speed high alarm
k) GUST HIGH ALARM --Set gust speed high alarm
l)
DEW POINT HIGH ALARM --Set dew point high alarm
m) HEAT INDEX HIGH ALARM --Set heat index high alarm
n) RAIN RATE HIGH ALARM --Set rainfall rate high alarm
o) RAIN DAY HIGH ALARM --Set rainfall day high alarm
LOW ALARM SETTING
a) In TEMP LOW ALARM--Set indoor temperature low alarm
b) In HUMI LOW ALARM --Set indoor humidity low alarm
c) In TEMP LOW ALARM --Set outdoor temperature low alarm
d) Out HUMI LOW ALARM --Set outdoor humidity low alarm
e) ABS BARO LOW ALARM --Set absolute barometric low alarm
f)
REL BARO LOW ALARM --Set relatively barometric low alarm
g) WIND CHILL LOW ALARM --Set wind chill low alarm
h) DEW POINT LOW ALARM --Set dew point low alarm
Under alarm mode, press the SET button to switch on or/off the alarm.
Press the ALARM button to switch between high alarm and low alarm setting.
Press HISTORY button or wait for 30 seconds at any time to return to normal mode.
When the alarm is activated, the alarm icon
will be displayed on the right of message
board.
When an alarm is triggered, the base station will emit a sound beep and the alarm icon
flashes. The corresponding text alarm message appears on the message board. Press any
button to stop sound beep. But the alarm icon will
continue to flash if the weather data still
above or below the threshold.
4. Max/Min Mode
In Normal Mode, press the MIN/MAX button to enter the max/min mode. In this mode, you can
view all minimum/maximum records of weather parameters.
Press MIN/MAX to switch among below records:
