Customer Serviceable P a r t s
H o w to Change the Filters
How
to
C
ha
ng
e
th
e
Fi
lt
er
s
C
us
to
m
er
S
er
vi
ce
ab
le
Pa
rt
s
Primary Filter: YT20 1st Filter
1st Filter
2nd Filter
C
ustomer Serviceable Parts
ATTENTION: The consumer accepts any and all responsibility and/or liability if
replacement filters and/or parts are not manufacturer specific. This unit contains high-
performance purifying filters and an advanced control system.
The life of the filter can vary greatly due to use, water pressure, water quality and the
changing of the seasons. Filters may need to be replaced sooner than the scheduled
time due to these reasons, you may notice reduced water quality or declining water taste.
Recommended filter replacement cycle:
951.0 gallons (3,600 L) / Every 6 months
Removes harmful chemicals like chlorine and
compounds like agrichemicals, detergents,
large suspended matter like rust, sediments, and
other volatile organic compounds efficiently via
activated absorption method. It also eliminates
bad
smells
and
the
remaining
chlorine
dissolved in the water.
Secondary Filter: YT20 2nd Filter
Recommended filter replacement cycle:
951.0 gallons (3,600 L) / Every 6 months
0.01 micrometer artificial film filters contami-
nated materials including ordinary bacteria, etc
and maintains minerals in water.
H
ow to Change the Filters
1.
Shut off the water supply to the unit and
turn the power off and unplug the power
cord. Open the door in front of the
product.
2.
Raise the filter to be replaced and turn it
counter clockwise to remove it.
3.
Put new filter into the right position by
truing it clockwise.
4.
When installing the filter, the connection
bump of the head and the connection
groove on the top of the filter should be
completely combined.
5.
Close the door, plug the power cord
back in, reengage the water supply and
switch the unit back on.
Close
Open
20
21
