Sy
st
em
S
et
up
Met
ho
d
pH L e v e l Adjustment
System Setup M e t h o d
Color of pH Testing ofEach Level :
Just remember when testing the pH be sure to allow unit to run for 2
minutes before taking a sample of the water. If you have to adjust percent-
age, after adjusting, run an additional 2 minutes before taking sample.
When testing pH values we like to use 2 Tablespoons of the water being
produced and 4 Drops of the Re-Agent in a clear glass.
The minimum and maximum Turbo waters produce will be dependent on
the water source quality. Set Turbo at 99% for maximum pH levels, these
levels can range normally as follows:
pH Chart
Alkaline Turbo (Dark Purple)
Acid Turbo (Dark Red)
Alkaline Level 1 = Approx 8.0 pH (light blue)
Alkaline Level 2 = Approx 8.5 pH (blue)
Alkaline Level 3 = Approx 9.0 pH (Dark blue)
Alkaline Level 4 = Approx 9.5 pH (Purple) H
2
O
= Approx 7.0 pH (green) Purified Water Acid
Level 1 = Approx 6.5 pH (light yellow) Acid
Level 2 = Approx 5.5 pH (light orange) Acid
Level 3 = Approx 4.5 pH (Red)
※
pH value indicated for each level is based on standardized test result which have used average tap water.
p
H Level Adjustment
S
ystem Setup Method
p
H
L
ev
el
Ad
ju
st
m
en
t
ALK 1ST:
ALKALIpH
ACIDICpH
LANGUAGE
VOLUME
3
Press
“
ALKALI pH
”
4
Press desired level.
2
Press the setup icon.
1
Press the top left corner of screen. MENU
options will fall below upper part of screen.
: ALK pH level up (09%, 10%, 11%...)
5
: ALK pH level down (07%, 06%, 05%...)
1 ALKALI pH LevelAdjustment
Push RETURN icon for previous menu screen. Voice says
:“Applied”
Push RETURN icon again to complete set up.
Voice says
:“Set up was completed”
If UP/DOWN Icon is pushed, digital number moves by one step.
ALK 1ST :
4
%
ALK 2ND :
5
%
ALK 3RD :
6
%
ALK 4TH :
7
%
4
%
ALK 2ND :
5
%
ALK 3RD :
6
%
ALK 4TH :
7
%
Backcolor
Orange highlight shows current position on menu.
A blue highlight means that changes to that setting are possible.
a
알칼리 산 성
정 수
F1
50%
F2
50%
P
S
S
30
31
