Installation & Service Manual
N6DHP(L, M, H, LR, MR)
April, 2006
Page 7
INSTALLATION PROCEDURES
Carpentry Procedures
Case Pull-Up Locations
All N6DHP models have four pull-ups at each
end of the case. Pull-ups A, B, C and D are
located as shown and should be installed and
tightened starting with A and finishing with D.
NOTE
If extra pull-up bolts are needed, use the
bolts from the side shipping supports.
See “General-UL/NSF I&S Manual” for
line-up assembly instructions.
Joining Rear Load Cases to Coolers
(N6DHPLR and N6DHPMR only)
For U.L. and temperature performance
requirements, N6DHPLR and N6DHPMR
cases must be backed by a refrigerated area.
TYLER walk-in coolers are available with the
necessary special parts and instructions to
make the installation.
NOTE
Please ensure that the cooler opening is
insulated and sealed completely to the
rear of the display case.
Summary of Contents for Advantage N6DHPH
