TLM, TLF, TLD
Page 24
TYPE OF CLEANING
CLEANING AGENT*
APPLICATION METHOD**
EFFECT ON FINISH
Paste NuSteel or DuBois
Rub with dry cloth. Use a
Use in direction of polish lines
Temp
small amount of cleaner.
on No. 4 (polished) finish.
May scratch No. 2 (mill) and
No. 7 and 8 (polished) finishes.
Cooper’s Stainless Steel
Apply with damp sponge or.
Use in direction of polish lines
Cleaner, Revere Stainless
cloth.
on No. 4 (polished) finish.
Steel Cleaner
May scratch No. 2 (mill) and
No. 7 and 8 (polished) finishes.
Grade F Italian pumice, Steel
Rub with a damp cloth.
Use in direction of polish lines
Bright, Lumin Cleaner, Zud or
on No. 4 (polished) finish.
Restoro
May scratch No. 2 (mill) and
No. 7 and 8 (polished) finishes.
Penny-Brite or Copper-Brite
Rub with a dry cloth. Use a
Use in direction of polish lines
small amount of cleaner.
on No. 4 (polished) finish.
May scratch No. 2 (mill) and
No. 7 and 8 (polished) finishes.
Heat tint or heavy
Penny-Brite or Copper-Brite
Rub with a dry cloth.
Use in direction of polish lines
discoloration
on No. 4 (polished) finish.
May scratch No. 2 (mill) and
No. 7 and 8 (polished) finishes.
Paste NuSteel or DuBois
Rub with dry cloth. Use a
Use in direction of polish lines
Temp
small amount of cleaner.
on No. 4 (polished) finish.
May scratch No. 2 (mill) and
No. 7 and 8 (polished) finishes.
Revere Stainless Steel
Apply with a damp sponge
Use in direction of polish lines
Cleaner
or cloth.
on No. 4 (polished) finish.
May scratch No. 2 (mill) and
No. 7 and 8 (polished) finishes.
Allen Polish, Steel Bright,
Rub with a damp cloth.
Use in direction of polish lines
Wyandotte, Bab-O or Zud
on No. 4 (polished) finish.
May scratch No. 2 (mill) and
No. 7 and 8 (polished) finishes.
Burnt-on foods and
Easy-Off, De-Grease-It, 4-6%
Apply generous coating.
Excellent removal, satisfactory
grease, fatty acids,
hot solution of such agents
Allow to stand for 10-15 min.
for use on all finishes.
milkstone (where swab-
as trisodium tripolyphospate, Repeated application may
bing or rubbing is not
or 5-15% caustic soda
be necessary.
practical)
solution
Tenacious deposits,
Oakite No. 33, Dilac, Texo 12, Swab and soak with clean
Satisfactory for use on all
rusty discolorations,
Texo N.Y., Flash-Klenz,
cloth. Let stand 15 minutes
finishes.
industrial atmospheric
Caddy Cleaner, Turco Scale
or more according to direc-
stains
4368 or Permag 57.
tions on package. Rinse
and dry.
Hard water spots
Vinegar
Swab or wipe with a cloth.
Satisfactory for use on all
and scale
Rinse with water and dry.
finishes.
5% oxalic acid, 5% sulamic
Swab or soak with a cloth.
Satisfactory for use on all
acid, 5-10% phospheric acid,
Let stand 10-15 minutes.
finshes. Effective on tenacious
or Dilac, Oakite No. 33,
Always follow with neutralizer deposites or where scale has
Texo 12 or Texo N.Y.
rinse, and dry.
built up.
April, 2007
Summary of Contents for Allegro TLD
