2
1.
3.
8.
2.
5.
4.
4.
7.
6.
PRIOR TO INSTALLATION
Parts
Check that the following parts are included in the packaging:
Figure 1: Steam Outlet Commercial parts
1. Steam Outlet Commercial Box
x 1
2. Left Side Cover
x 1
3. Right Side Cover
x 1
4. Washer
x
2
5. Screw 8 mm
x 2
6. Membrane
x
3
7. Screw 25 mm
x 2
8. 15 mm threaded drain pipe
Contact your dealer if anything is missing.
Installation tools
The following tools and materials are needed for installation and
connection:
• knife
• screwdrivers.
Installation planning
Before starting to install your sauna heater:
•
Install the Steam Outlet before installing the sauna heater on
the wall.
•
Plan how the steam pipe should be installed (See the in-
stallation guide for the Steam Generator how to do a proper
steam pipe installation)
•
Which side the steam pipe should be installed on the Steam
outlet Commercial?
•
Plan for the drainage
•
Use as large pipe as possible (1 “) for the steam to keep
noise down and as little sharp bend close to the Steam Outlet
possible.
7.
5.
