6. Alert status
When tyre pressure and temperature are below or exceeding the pre-defined values,
the relative icon will display on the monitor and the value will flash, with an audible
alarm. Press any button to turn off the alarm. The flashing icon will continue until the
problem has been fixed.
The factory preset values are:
High pressure: 3.0 BAR (44 PSI)
Low pressure: 2.0 BAR (29 PSI)
High temperature: 65 °C (149 °F)
1. High pressure alert
Example: when the pressure of left rear tyre is 3.1 BAR (higher than the set high
pressure value), the high pressure icon and value will flash, with the audible alarm
(Figure 6-1-1).
Pressure value flashes
Fig 6-1-1
2. Low pressure alert
Example:, when the pressure of left rear tyre is 1.9 BAR (lower than the set low pressure
value), the low pressure icon and value will flash, with an audible alarm (Figure 6-1-2).
Pressure value flashes
Fig 6-1-2
11
Summary of Contents for T802C
Page 4: ......
