Maintenance and repairs
30
2.0
4. Carefully lift up the main filter (3), see Figure 5-4, page
30
.
Figure 5-4. Removing the main filter
5. If the filter is clogged, the filter should be cleaned. For instructions on how to
clean the filter, see under Filter cleaning, page
23
.
6. If the filter is torn or defective, it should be replaced. In this case, go to Replace
main filter, page
31
for further instructions. Otherwise, the filter should be
fitted back in place.
5.4
Every week
5.4.1
General inspection
Carry out a general inspection to make sure everything is clean and undamaged. Clean,
if necessary.
•
Check that the gaskets are undamaged and clean.
•
Lift out the filter and check that it is undamaged and clean.
7\UROLW9&('