5.
Press and release the
S
button until the correct hour appears. With the
correct hour on the display, press the
M
button and the minute display will
flash.
6.
Press and release the
S
button until the correct minute appears. When the
correct minute is on the display, press the
M
button to move on to PC link
mode.
7
. If you press
S
button (yes), it will appear “PC” link mode for
transferring test data. Further instruction of transferring test
data, see page.22. To finish setting, press
M
button (no) to
turn off the meter. Your programmed settings will be
shown
on the display every time you use the Meter.
Code Setting and Unit Selection
1.
Select unit, mg/dL or mmol/l on the back.
(The mg/dL is the standard unit in the
United State)
2.
Plug the Glucode Chip into the Glucode
Chip slot for strip coding.
RESET
m
m
o
l/l m
g
/d
L
S/N:M05B13286
Blood glucose Meter
For
in vitro
diagnostic
use only
Manufactured by:
Tyson Bioresearch.Inc.
Chu-Nan,Taiwan
Customer Service
Call:+886-37-585988
service@tysonbio.com
Tyson ID:T502
0537
4 719869 700353
mmol/l mg/dL
14
