Applying a Blood Sample
SAMPLE MAY BE OBTAINED FROM FINGER, PLAM, OR FOREARM
1. Introduce the tip of the test strip to the drop of blood. Blood sample will be automatically drawn into the test strip
(Fig.34). Discard the first drop of blood sample to prevent contamination.
2. Hold the tip of the test strip touching the blood drop until the meter beeps.
3. The meter will start to countdown as soon as the blood has completely filled the confirmation window of the test strip
If applying an insufficient blood sample, the error code (E-7) will appear on the display (Fig35).
4. The test result will appear on the display in 5 seconds (Fig.36). All results will be automatically stored into the
meter memory (Fig.37).
5. The meter will automatically turn off after 2 minutes.
6. After completing the test, push the strip ejector (Fig.38) or use a tissue paper to remove the test strip.
(Fig.34)
Sufficient
Blood
Insufficient
blood
(Fig.35)
(Fig.36)
(Fig.37)
(Fig.38)
17
