Voice Guidance Setup
˙
Press to turn on the meter. will appear. (Fig.59)
˙
The voice guidance feature is “ON” by default.
˙
Please proceed the following steps
Voice Guidance
(Fig.59)
1. When the meter is switched off, press and hold for 4 seconds to enter into setting mode.
2. Press or to select “ON”(Fig.60) or “OFF” (Fig.61). A beep will sound when voice is set “ON”.
3. Press to confirm.
4. If the voice is set on, press or to select voice volume. The numbers of “volume” will appear and flash. Press or
to adjust from 1 to 15 (Fig.62).
5. Press to confirm.
6. “L1” or “L2” will appear and flash. Press or to select a Language (Fig.63).
7. Press to confirm.
Note: L1 is English (default) / L2 is Spanish
(Fig.60)
(Fig.61)
(Fig.62)
(Fig.63)
22
