© 2021 TytoCare All rights reserved.
49 of 76
TytoPro General Operation User Guide
Performing an Identified Visit
Using Connected External Devices
When selecting an external exam of the type supported by your connected external device, you
are prompted to start the relevant exam.
Omron EVOLV - Blood Pressure Monitor
1. Select the Blood Pressure exam.
2. Make sure your mobile device’s Bluetooth is enabled.
3. Perform the Blood Pressure exam with the Omron EVOLV device.
4. Wait a few seconds after a successful reading.
5. Look at the results on the App, and approve if they are identical to your expectations.
Note
: If you prefer, you can skip the connected reading and enter the results manually.
Note
: The reading shows the time of day in which the measurement was performed.
TytoCare Pulse Oximeter - Blood Oxygen Exam
*
1. Select the Blood Oxygen icon from the exam menu.
2. Connect the Pulse Oximeter to the
cable and Tyto Device and turn it on.
3. Insert your finger as deep as possible into the Pulse Oximeter. Try not to move or apply
pressure to your finger.
4. Wait until the Pulse Oximeter completes analysis.
The result is displayed
*
Relevant only where sold. Note: Federal law restricts this device to sale by or on the order of a
physician.