background image

Easy Fold Deluxe – ET1B

 User’s Manual  T. Rev. 0512 PM 

16 

7.  HELPFUL HINTS FOR EVERYDAY USE 

Before using your 

Easy Fold Deluxe

 take the following precautions: 

 

Ensure that the front column and rear frame are locked together. 

 

Ensure that the rear frame is locked open. 

 

Speed Controls 

Operate your 

Lexis Light

 at a reasonable speed for both your 

personal safety and others. Do not make sharp turns at high speeds or on 

inclines. 

Stopping 

When hand control lever is released, dynamic braking will gradually bring 

your 

Lexis Light

 to a stop and the automatic brake will be applied. 

Ramps and Inclines 

Lean forward and carefully maneuver your 

Lexis Light 

up a ramp or 

incline. Be aware that not all ramps are constructed according to government 

standards. The government standard for wheelchair ramps is 1 inch (2.5 cm.) 

rise per foot (30 cm). 

Lower the speed setting to a slow speed when descending inclines. 

Using an elevator 

Backing into an elevator allows you to exit forward. Be sure that the elevator 

is level with the floor. 

Opening Doors 

When a door opens towards you, approach at an angle and just off to one 

side. Adjust the speed knob to a low setting. Grasp the doorknob, reverse 

and pull the door open. For doors that open away from you, position the front 

roller against the door, close to the doorjamb on the doorknob side of the 

door. After you release the latch, use the roller to push the door open. 

 
WARNING:

 Be careful with glass doors to avoid personal injury! 

Summary of Contents for Easy Travel Lexis Light

























Reviews: