Lexis Light
–
ET1B
User’s Manual T. Rev. 0512 PM 17
8. GENERAL MAINTENANCE AND INSPECTIONS
Minimum maintenance should prevent unnecessary repairs.
Keep Your
Easy Fold Deluxe
Shining
Wipe the seat clean with a damp cloth. Protect the painted parts with a coat
of auto wax.
WARNING:
Water or excessive moisture around the controller unit or
electrical connections may cause contamination of electrical circuitry, damage
and malfunction as well as personal injury. Do not leave your
Lexis Light
in the rain or in excessively humid locations.
Daily Checks
With the
Lexis Light
switched off, check that the hand control lever
mechanism returns to the rest position when you push and release. If there is
a problem do not use the
Lexis Light
and contact your authorized
dealer.
Weekly Checks
1.
Throttle test:
Pull the throttle to the full speed position and switch ON the
Power switch. The
Lexis Light
should not move and the LED on
the panel should flash. If the
Lexis Light
does move – do not use
your
Lexis Light
. Contact your authorized dealer.
2.
Automatic brake and drive test:
This test should be carried out on a
level surface with at least 3’ / 1 m. clear space around the
Lexis Light
Switch
the
Lexis Light
on.
Move the control lever only slightly in the forward direction until you hear
a “click” when the brake disengages. The
Lexis Light
should start
to move forward slowly.
Immediately release the throttle. You must be able to hear a “click” when
the brake engages back, within a few seconds.
Repeat the test in the reverse direction.
If you do not hear the brake operating, or the
Lexis Light
does not
move slowly in the expected direction – do not use your
Lexis Light
.
Contact your authorized dealer.
