Lexis Light
–
ET1B
User’s Manual T. Rev. 0512 PM 7
4. ASSEMBLY AND FOLDING INSTRUCTIONS
4.1. Assembling your
Lexis Light
Unfolding Rear Frame
Pull on the folded frame lock pin ring
(Fig. 4/1) to release the foot platform
and unfold the frame. Pull the seat
backrest (Fig. 4/2) and lift it to the
upright position. Ensure that the
unfolded frame lock pin secures the
platform in the horizontal position.
Unfolding Front Column
Pull the column lock trigger (Fig. 4/3)
upward towards the handle to release
the tilt lock. Move the drive unit away
from the column (all the way) to open
the quick-release housing. This is the
column “detach” position.
Connecting the Front Column to the
Rear Frame
Position the column in the “detach”
position. Lift the front of the foot
platform and insert connection pin into
the quick-release housing on the drive
unit. This may be done without bending
down by lifting the front of the seat “lip”
while holding the front column hand-
grip as shown in Fig. 5.
