EasyTravel Elite – ET1E
User’s Manual
Rev. 0708
15
6. MOVING AND TRANSPORTING YOUR
EasyTravel Elite
6.1. Moving Your
EasyTravel Elite
in Freewheel Mode when unfolded:
The Freewheel switch (Fig. 1/17) is used for releasing the brake and mov-
ing the
EasyTravel Elite
without operating the motor. Before activating,
make sure your
EasyTravel Elite
is switched on. Turn Freewheel switch to
the "freewheel" position and push or pull the
EasyTravel Elite
manually.
NOTE:
The Freewheel mode can only be activated
after
the battery is in
place and the power switch (Fig.9/1) is turned on. Doing otherwise will
cause a fault situation indicated by rapid flashing of the Indicator light
(Fig. 9/4). See section 4.2.
WARNING:
The Freewheel switch should
never be engaged on a slope.
CAUTION:
The seat back must remain in
the upright position.
6.2. “Walking” your
EasyTravel Elite
in the folded position
The folded
EasyTravel Elite
may be
pulled along suitcase style. The battery
should be carried separately (Fig. 11) or
in the utility basket. See folding instruc-
tions on page 8.
6.3. Transporting
Your
EasyTravel
Elite
Quickly And Easily
Your
EasyTravel Elite
can be disassem-
bled and transported in most car trunks.
When disassembling for transportation or
storage:
1.
Disconnect battery pack and place in
Utility basket (Fig. 12/1)
2.
Disconnect front column (Fig. 12/2) and
fold rear frame separately (Fig. 12/3)
3.
For storage – set down front column
in a stable position.
4.
For transportation, place
EasyTravel
Elite
components in car trunk as
shown in figure 13
.
