LARA-R2 series - System Integration Manual
UBX-16010573 - R12
Approvals
Page 136 of 157
4.2
US Federal Communications Commission notice
United States Federal Communications Commission (FCC) IDs:
u-blox LARA-R202 cellular modules:
XPY1EIQ24NN
u-blox LARA-R203 cellular modules:
XPY1DIQN3NN
u-blox LARA-R204 cellular modules:
XPY1EIQN2NN
4.2.1
Safety warnings review the structure
Equipment for building-in. The requirements for fire enclosure must be evaluated in the end product
The clearance and creepage current distances required by the end product must be withheld when the module
is installed
The cooling of the end product shall not negatively be influenced by the installation of the module
Excessive sound pressure from earphones and headphones can cause hearing loss
No natural rubbers, no hygroscopic materials nor materials containing asbestos are employed
4.2.2
Declaration of conformity
This device complies with Part 15 of the FCC rules and with the ISED Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
this device may not cause harmful interference
this device must accept any interference received, including interference that may cause undesired operation
Radiofrequency radiation exposure Information: this equipment complies with FCC radiation
exposure limits prescribed for an uncontrolled environment for fixed and mobile use conditions.
This equipment should be installed and operated with a minimum distance of 20 cm between the
radiator and the body of the user or nearby persons. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter except in accordance with FCC
procedures and as authorized in the module certification filing.
The gain of the system antenna(s) used for the LARA-R2 series modules (i.e. the combined
transmission line, connector, cable losses and radiating element gain) must not exceed the value
specified in the FCC Grant for mobile and fixed or mobile operating configurations:
o
LARA-R202 modules:
o
9.8 dBi in 700 MHz, i.e. LTE FDD-12 band
o
10.0 dBi in 850 MHz, i.e. LTE FDD-5 or UMTS FDD-5 band
o
6.5 dBi in 1700 MHz, i.e. LTE FDD-4 band
o
8.7 dBi in 1900 MHz, i.e. LTE FDD-2 or UMTS FDD-2 band
o
LARA-R203 modules:
o
9.7 dBi in 700 MHz, i.e. LTE FDD-12 band
o
7.1 dBi in 1700 MHz, i.e. LTE FDD-4 band
o
10.5 dBi in 1900 MHz, i.e. LTE FDD-2 band
o
LARA-R204 modules:
o
10.2 dBi in 750 MHz, i.e. LTE FDD-13 band
o
7.6 dBi in 1700 MHz, i.e. LTE FDD-4 band
