TOBY-L4 series - System Integration Manual
UBX-16024839 - R04
Approvals
Page 127 of 143
4.3
Innovation, Science and Economic Development Canada notice
ISED Canada (formerly known as IC - Industry Canada) Certification Numbers:
u-blox TOBY-L4006 cellular modules:
8595A-1EHQ37NN
4.3.1
Declaration of Conformity
This device complies with the ISED Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions:
this device may not cause harmful interference
this device must accept any interference received, including interference that may cause undesired operation
Radiofrequency radiation exposure
Information: this equipment complies with radiation
exposure limits prescribed for an uncontrolled environment for fixed and mobile use conditions.
This equipment should be installed and operated with a minimum distance of 20 cm between
the radiator and the body of the user or nearby persons. This transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter except as authorized
in the certification of the product.
The gain of the system antenna(s) used for the TOBY-L4006 modules (i.e. the combined
transmission line, connector, cable losses and radiating element gain) must not exceed not
exceed the value specified in the ISED Canada Certificate Grant for mobile and fixed or mobile
operating configurations:
o
7.1 dBi in the 700 MHz band, i.e. LTE FDD-12 band
o
7.0 dBi in the 750 MHz band, i.e. LTE FDD-13 band
o
0.7 dBi in the 850 MHz band, i.e. GSM 850, UMTS FDD-5 or LTE FDD-5 band
o
5.5 dBi in the 1700 MHz band, i.e. UMTS FDD-4 or LTE FDD-4 band
o
2.7 dBi in the 1900 MHz band, i.e. GSM 1900, UMTS FDD-2 or LTE FDD-2 band
