Troubleshooting and Maintenance
60
Document Number 206465-0001
User Guide
Tip wipe assembly
The tip wipe assembly should be replaced approximately every 500 hours.
1. Completely power down the printer. See
“Powering off” on page 49
.
2.
Move the head to the right of the printer to gain access to the tip wipe assembly.
Figure 46: Move the toggle head to the right
3.
Remove the tip wipe assembly by lifting the assembly up and out of the printer. Discard this tip wipe
assembly.
Figure 47: Replacing the tip wipe assembly
4.
Place the new tip wipe assembly over the two mounting posts making sure the assembly is fully
installed.
Summary of Contents for 180-00108 uPrint
Page 1: ...User Guide...