Introduction
CVilization
is a utility module designed for mixing, routing and sequencing up to four
CV or audio
signals.
Three of the four modes include quantization, sample & hold and glide per channel.
CVilization sets a high technical standard for a digital Eurorack module:
+/- 10V
max. for the inputs and
outputs,
24-bit / 96kHz
… and low latency thanks to a fast processor and modest buffer requirements.
CVilization is controlled by twisting and pressing 8
rotary encoders
. For visual feedback about the current
function, the integrated
LED
s change colour and brightness, sometimes ‘breathing’ or flashing.
A
performance
page
with sub-pages (accessible by pressing encoders) replaces the usual encoder-plus-
mini-display combination. After some practice, CVilization can be operated very quickly and effectively.
our
on
4
I
II
III
IV
MODE button
Press repeatedly to step through the four modes
Also: To load a preset, hold MODE then
press
an encoder
To save a preset, hold MODE then
long-press
an encoder
LE = left encoders 1-4
Turn = Perform
Press
➔
to
Program
page
Long-press
➔
to Config page
CV-A input jack
Clock / Trigger
Mode IV: also CV
CV-B input jack
Trigger for reset, alt. clock
Also for external control e.g.
quantization, glide on/off,
mutate, start recording etc.
4 input jacks
for CV or audio
4 output jacks
for CV or audio
RE = right encoders 1-4
Turn = Perform
Press
➔
to
Program
page
Long-press
➔
to Static Offsets
page (Mode I only)
1
2
3
4
1
2
3
4
MODE
A
B
CV
1
2
3
4
Summary of Contents for CVilization
Page 1: ......