SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE •
SERVICE
USER GUIDE
u-line.com
Defrost 1
Remove Fan and Cover
PARTS REPLACEMENT
Note:
These models do not require removal of the ice
maker or freezer housing to access the fan motor,
drain or evaporator.
REPLACING EVAPORATOR FAN MOTOR
1.
Disconnect unit from power source.
2.
Remove two screws from fan cover.
3.
Remove two screws holding fan bracket to liner.
4.
Unplug fan connection.
5.
Remove two nuts holding the fan to the fan bracket.
6.
Replace with new fan making sure air flows in at top
and out at bottom.
7.
Plug in the fan connection.
8.
Reinstall fan bracket to liner, making sure the fan
wires are tucked behind the fan bracket.
9.
Reinstall unit and test.