U-Line 2175BEVOL, Use And Care Manual

2175BEVS, 2175BEVOL

9

To adjust the set-point temperature:

1. Press and release either the WARMER icon 

(Figure 

6, 2)

 or COOLER icon 

(Figure 6, 4)

 to put the 

controller in the SET TEMPERATURE mode. The °F 
symbol 

(Figure 6, 3) 

will begin to flash.

NOTE:

 If no further action is taken, this mode will self 

cancel in five seconds, and the original set-point 
temperature will be displayed.

2. While the °F symbol is flashing, press the WARMER or 

COOLER icon as required to adjust the set-point 
temperature.

3. The change will be set five seconds after adjusting the 

temperature and the new set-point temperature will be 
displayed.

Normal Operating Sounds

All models incorporate rigid foam insulated cabinets to 
provide high thermal efficiency and maximum sound 
reduction for its internal working components. In spite of 
this technology, your model may make sounds that are 
unfamiliar. 

Normal operating sounds may be more noticeable 
because of the unit’s environment. Hard surfaces such as 
cabinets, wood/vinyl/tiled floors and paneled walls have a 
tendency to reflect normal appliance operating noises.

Common refrigeration components, and a brief 
description of the normal operating sounds they make, 
are listed below. 

NOTE:

 Your product may not contain all 

of the components listed.

• Compressor: The compressor makes a hum or pulsing 

sound that may be heard when it operates. 

• Evaporator: Refrigerant flowing through an evaporator 

may sound like boiling liquid. 

• Condenser Fan: Air moving through a condenser may be 

heard.

• Automatic Defrost/Drain Pan: Water may be heard 

dripping or running into the drain pan when the unit is in 
the defrost cycle.

Wine Stocking Recommendations

Specially designed wine racks allow for the proper 
horizontal storage of wine. The bottles are properly 
positioned so the wine remains in contact with the cork to 
assure that the cork does not become dry.

Stock the wine racks by staggering the bottles as shown 

(Figure 7)

:

Figure 7

ULIN_0019_A