CONNECTING THE WATER SUPPLY
6
User’s Manual
UL101
POWER
CORD
WATER LINE
3. Carefully bend the water sup-
ply line into position and con-
nect the line to the solenoid
valve (see Figures 5 and 6).
Avoid kinking the water sup-
ply line.
Figure 3
Figure 5
Figure 6
Figure 4
1. Install the 1/4 inch copper
water line from the main
water source. On ice maker
models BI-95 and BI-98, the
water line is inserted
through the hole in the rear
of the unit to connect to the
solenoid valve in the front
(see Figure 3).
UL134
2. Locate the compression fit-
ting and ferrule packed in the
unit. Slide the compression
fitting and ferrule over the
1/4 inch water supply line.
Do not use thread sealing
compound or tape. Using
two wrenches, tighten the
compression fitting on the
supply line (see Figure 4).
UL103
WATER
CONNECTION
UL104
WATER LINE
