background image

U-Line 3000 Series Maintenance

11

Leveling

IMPORTANT

IMPORTANT

Unit must be level for proper door operation

1. Use a level to check the levelness of the unit from front to back 

and from side to side. Place the level along top edge and side 
edge as shown (1).

2. If the unit is not level, rotate the adjustable leveling legs to raise 

or lower each corner of the unit (2) as necessary.

3. To rotate rear leveler legs remove grille (See Removing and 

Installing Grille on page 

11

)

4. Using the provided 1/4” T bar allen wrench rotate the 2 

adjustment screws as shown below.

5. Check levelness after each adjustment and repeat the previous 

steps until the unit is level.

Removing and Installing Grille

WARNING

• Disconnect electrical power to the unit before 
removing the grille.
• Edges of sheet metal may be sharp

Removing the grille.

1. Disconnect power to unit.

2. Using the included 7/64” Allen wrench, loosen both grille locking 

screws. See below

3. Gently pull grille away from unit until it stop. 

4. Push Grill tabs towards the center of the unit to lift rails off 

locking screw. 

5. Pull grille free from unit. 

Installing the grille.

1. Align slots in grille rail with screw heads in base of unit

2. Push grille tabs towards the center of the unit and set tabs over 

screw head.

3. Slide grille into position. Using included 7/64 Allen wrench 

tighten grille locking screws.

Adjusting Grille

The grille has an automatic vertical plane adjustment and can also 
be adjusted on its horizontal plane as well. To adjust your grille to 
match your surrounding cabinetry follow the instructions below.

1. Loosen the locking bolts on the inside of the grille tabs. 

Locking bolts are located on the inside of each grille rail.

2. Pull grille out to desired position and secure locking bolts.

3. The grille has a skirt that will self adjust to the height of your 

floor.

6 3000 Series Maintenance

1

2

Rotate Clockwise to raise rear leg

Rotate Counter-Clockwise to lower

Rotate Clockwise to raise rear leg

Rotate Counter-Clockwise to lower

Grille Mounting

Screws

Self Adjusting Grille

Skirt

Summary of Contents for 3000 SERIES

























Reviews: