SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE •
SERVICE
Control Operation - Service 7
USER GUIDE
u-line.com
or
customer service will result in voiding of the
manufacturer warranty.
Re-Select Model allows the units model information to
be modified. Changing the units model completely
reprograms available zones, relay assignments, DC
output assignments etc.
To access Re-Select Model
1.
Press
to select “Re
-Select
Model”.
2. Press .
To change model setting
3.
Press
to select “Model=” and press . “Model”
will begin to flash.
4.
Press to scroll through each
available model.
5.
Press
to confirm. While processing, the
will momentarily change to .
*
To exit Re-Select Model, press
to select “Return to
Menu” and press
to confirm. (Power cycling unit is
recommended after re-selecting model.)
Factory Wi Fi
The Factory Wi-Fi option is only used in manufacturing
and should always be OFF.
1.
Press
to select “Factory Wi
Fi”.
2.
Press
3.
Press select “OFF”.
To exit the Factory Wi Fi menu press to select
“Return to Menu” and press
to confirm outputs.
Set Points
The Set points menu contains options to modify both
the Zone and Evap set points. Changes to the zone
set point will be reflected on the main screen.
Changes to the evap set point alter the temperature
the evaporator needs to meet during a defrost cycle.
To access Set Points
1.
Press
to select “Set Points”.
2.
Press
3.
Press to scroll through
available set points.
To change set points
4.
Press
, the selected set point will begin to
flash.
5.
Press to modify the value.
6.
Press
to confirm setting.
To exit the Set Points menu, press
to select “Return
to Menu” and press
to confirm.
Up
Select
Down
Up
Select
Down
RETURN TO MENU
SET POINTS
ZONE = 3°C
EVAP = 5°C
or
.
or
.
and
Summary of Contents for 3024DWR
