SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE •
SERVICE
Control Operation - Service 8
USER GUIDE
u-line.com
Fan Delay
(excludes ZWC)
The Fan Delay menu option allows the modification of
fan run times during and after a cooling cycle. In
order to allow time for the evaporator to properly
cool, the evaporator fan is delayed from starting with
the cooling cycle for a given amount of time. In order
to remove as much warmth as possible from the
cabinet the evaporator fan will continue to run at the
end of the cooling cycle for a given amount of time.
Fan Delay On=
“Fan Delay On” is the amount of time in minutes the
fan will be delayed from starting from the beginning
of a cooling cycle.
Fan Delay Off=
“Fan Delay Off” is the amount of time in minutes the
fan will continue to run at the end of a cooling cycle.
To access Fan Delay
1. Press
to
select “Fan Delay”.
2.
Press .
To change fan delay
3.
Press
to select either “Fan Delay On” or “Fan
Delay
Off” and press
. The chosen option will begin
to flash.
4.
Press
or
to change settings.
5.
Press
to confirm.
To exit Fan Delay, press
to select “Return to Menu”
and press
to confirm.
Showroom Mode
Showroom displays a number of features and allows
the unit to be powered on without running the cooling
system.
To toggle showroom mode
1.
Press
to select “Showroom
Mode”.
2.
Press
3.
Press to select “Off” and
press
. “Off” will begin to flash.
4.
Press to toggle between off
and on.
5.
Press
to confirm.
If set to “on” showroom mode will begin immediately.
To exit showroom mode press and hold for 5
seconds and release. The display will show a
countdown to switching the unit off. Press again
and the unit will immediately switch on retaining the
presets from before it entered showroom mode.
To exit the showroom mode menu, press to select
“Return to Menu” and press
to confirm.
Up
Select
Down
RETURN TO MENU
FAN DELAY
FAN DELAY ON = 1
FAN DELAY OFF = 2
Up
Select
Down
RETURN TO MENU
SHOWROOM MODE
OFF
.
or
Summary of Contents for 3024DWR
