USER GUIDE
Control Operation - Service 7
u-line.com
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE •
SERVICE
To exit the Set Points menu, press to select “Return to
Menu” and press to confirm.
Factory Default
Factory Default will restore all settings to their factory
default.
To access Factory Default
1. Press to select “Factory Default”.
2. Press .
To restore settings to their factory default.
3. Press to select “Restore?” and press
4. “Restore?” will change to “Restoring...” while settings
are restored. When restoration is complete,
“Restoring...” will return to “Restore?”.
To exit Factory Default, press to select “Return to
Menu” and press to confirm.
Re-Select Model
NOTICE
Before altering model selection U-Line customer
service must be notified. Failure to notify
customer service will result in voiding of the
manufacturer warranty.
Re-Select Model allows the units model information to be
modified. Changing the units model completely
reprograms available zones, relay assignments, DC output
assignments etc.
To access Re-Select Model
1. Press to select “Re-Select Model”.
2. Press .
To alter model setting.
3. Press to select “Model=” and press . “Model” will
begin to flash.
4. Press or to scroll through each available model.
5. Press
to
confirm.
To exit Re-Select Model, press to select “Return to
Menu” and press to confirm.
Up
Select
Down
RETURN TO MENU
FACTORY DEFAULT
RESTORE?
Up
Select
Down
RETURN TO MENU
RE-SELECT MODEL #
3018R
