QUICK START GUIDE
13
USER GUIDE
u-line.com
General Installation
Connect nitrogen to keg
1. Attach gas jumper lines to elbow connectors on infuser
regulators - line up and press in firml .
2. Attach gray coupler of the gas jumper lines to kegs.
With your thumb press down on the top of the coupler
while pulling up on collar. Press coupler down firml
onto "in" valve. Release collar - listen for a click. Pull
up on the coupler to ensure it is locked down.
3. Attach infuser hoses to T-connectors on infuser
regulators.
In Valve
1. Attach black couplers of the liquid jumper lines to keg.
With your thumb press down on the top of the coupler
while pulling up on collar. Press coupler down firml
onto "out" valve. Release collar - listen for a click. Pull
up on the coupler to ensure it is locked down.
Out Valve
Connect keg to tower
Other ends are connected
to Infuser Regulators
