background image

2

CO29, CO75

Congratulations on your purchase of a U-Line refrigeration product. A pioneer in the field for more than 40 years, U-Line 
Corporation is the world’s number one manufacturer of built-in, under-counter, specialty refrigeration and ice making 
products. U-Line dedicates 100% of its research and development to these products. The result: U-Line technology 
consistently leads the market with innovation, design, depth of product line and performance.

U-Line products are making life more convenient in homes, businesses, and hotels around the world.  U-Line supports its 
products with a strong dealer network, and its commitment to quality even extends to environmentally safe packaging.

IMPORTANT

READ all of the instructions in this guide completely before operating the unit for the first time.

For future reference, keep this guide in a safe, accessible location. If you need additional information or assistance, 
please contact U-Line Corporation directly. Contact information appears on the rear cover of this guide.

If you have a problem with the operation of this product, the SERVICE section of this guide will assist you in quickly 
identifying common problems and provide information on possible causes and remedies. If your product needs service, 
contact U-Line directly.

Warranty Registration

Your U-Line Corporation Limited Warranty is located on the inside rear cover of this guide. To validate your warranty, the 
product and its original purchase date must be registered. A Warranty Registration Card has been included for this 
purpose in the package containing this manual. Complete and mail the Warranty Registration Card, or register your 
product online at www.U-LineService.com as soon as possible after purchase.

If your product registration is not on file and a request for warranty coverage is received, the date of sale to the U-Line 
Selling Dealer or Distributor will be established as the first date of warranty coverage for your product.

Please Record Your Model Information

When you request additional information or service, you will be asked for your products model and serial numbers. You 
can find this information on the serial plate located on the upper right or rear wall in the interior of your unit. This 
information also appears on the warranty registration card.

Figure 1

Please record the model number 

(Figure 1, 1)

, serial number 

(Figure 1, 2)

, date of purchase, and dealer contact 

information for your U-Line product below:

Model Number:

_____________________________________________________

Serial Number:

_____________________________________________________

Purchase Date:

_____________________________________________________

Dealer Name:

_____________________________________________________

Dealer Address:

_____________________________________________________

Dealer Telephone:

_____________________________________________________

1

Introduction

1

2

ULIN_0023_A

ULIN_016357_30089.fm  Page 2  Monday, March 27, 2006  10:25 AM

Summary of Contents for Combo CO29

























Reviews: