9.
When the self-cleaning process stops (approximately 45 minutes)
it may be desirable to clean the storage bin at this time (see
INTERIOR CLEANING
).
10. Move the cycle selector switch to the ICE position to resume ice
production.
INLET SCREEN CLEANING — EVERY YEAR
The solenoid valve inlet screen must be cleaned at least once each year
as follows:
1. Shut off the water at the water supply valve.
2. Remove front access panel to expose water solenoid valve.
3. Remove the entire hose con-
nector from the solenoid
valve.
4. Use a tooth brush to clean
sediment from the inlet
screen (see Figure 28). DO
NOT remove the screen.
5. Attach the hose connector
to the solenoid valve.
Tighten connector securely
with a pliers. Open the water
supply valve and check for
leakage at the hose connector.
26
User’s Manual
UL403
I C E
O
F
F
C
L
N
Figure 28
