PAGE 10 OF 30
0917 IH-1030
PISTON REPLACEMENT
1. Remove screws and nut with 8mm Spanner wrench
and 4 mm Allen wrench. (See Figure 24)
2. Remove magazine assembly. (See Figure 25)
3. Loosen set screw with a 3mm Allen wrench to unlock
the adjusting rod.
4. Slide linkage mechanism and adjusting rod
simultaneously from collar.
5. Loosen collar with a 3mm straight rod to remove the
spring. (See Figure 26)
OPERATING INSTRUCTIONS CONTINUED
6. Loosen screw with a 3mm Allen wrench and remove
the block through the window.
7. Loosen screws with a 3mm Allen wrench and remove
the cap. (See Figure 27)
8. Remove the piston assembly with a 10mm Spanner
wrench. (See FIgure 28)
9. Remove piston and replace.
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com
Figure 24
Figure 27
Figure 25
Figure 28
Figure 26
Magazine Assembly
Spring
Cap
Piston Assembly
