PAGE 1 OF 6
1222 IH-10415
H-10415
GLASS DRY ERASE
PARTITION
1-800-295-5510
uline.com
PARTS
ASSEMBLY
TOOL NEEDED
Two Person Assembly
Required
WARNING! Glass dry erase boards are made
of safety glass, but improper handling and
installation may cause serious injury if the
board shatters. Proper installation will require at
least two people.
1. Lay board on its side with second person holding it
in place.
2. Align base perpendicular to board and ensure that
holes on base align with holes on board. Insert two
flange bolts and tighten using wrench. (See Figure 1)
3. Repeat step 2 with remaining base and flange bolts
on opposite side of board.
4. Return partition to a standing position.
Wrench
(included)
Glass Board x 1
Base x 2
Double-Sided Tape
x 4
Flange Bolt x 4
Caddy x 1
Figure 1
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
