background image

PAGE 1 OF 3 

0614 IH-1069

π

  H-1069

6" CRIMPER

HAND SEALER

1-800-295-5510

uline.com

SETUP

1.  Attach the two metal clamp brackets (A) approximately 

4⁄" apart to any straight-edge table with a depth 1⁄" 

and height of up to 36". (See Figure 1)

2.  Attach the silver link chain (B) to jaw bracket (C). 

Holding the sealer jaws together, push the jaw 

bracket pins up from the bottom of the sealer until 

they snap over the top of the unit. Position the 

bracket as close to the sealing jaws as possible. 

(See Figure 2)  

Rest the sealer on the clamp brackets. Attach the 

other end of the chain to the “S” hook on the foot 

pedal (D). (See Figure 3)

3.  Position the foot pedal directly underneath the 

sealer and pointed away from you, so the tip with 

the “S” hook is pointing toward the sealer (or table). 

Leave enough tension in the chain so that the tip of 

the pedal lifts 2-3" from the floor. (See Figure 3)

A

Figure 1

C

C

B

Figure 2

D

Figure 3

Reviews: