U-Line H-10903, Instructions Manual

PAGE 5 OF 18 

0623 IH-7935

OPERATION

POWER ON/OFF

1.   Press  the 

ON/OFF

 key for two seconds to turn the 

scale on or off. 

CAUTION! Never power the scale on with weight 
on the platform.  

2.  When turning on, the indicator will show  

000000-999999 before entering weighing mode. 

3.  Check that the LCD display and the status lights are 

working properly.

ZERO

INITIAL ZERO SETTING

When turning the scale on, if the weight on the display 

indicator is within the initial zero tolerance, the indicator 

will show 

zero

.

MANUAL ZERO SETTING

1.  Wait for the scale to stabilize.

2.  Press the 

ZERO

 key. The display will show zero weight.

TARE

1.  Press the 

TARE

 key. 

2.  The indicator will show the net weight. The Net and 

Tare indicators will be displayed on the bottom of 

the indicator. 

3.  Press the 

TARE

 key. Zero the weight. 

4.  The indicator will display the gross weight.

ACCUMULATION 

1.  Zero the weight. Load weight until the scale stabilizes.

2.  Press the 

TOTAL

 key to enter accumulation mode. 

3.  Total indicator will be displayed on the bottom of the 

indicator. Display will read 

n 001

 then will display 

the loaded weight. 

4.  Unload the weight. Zero the weight. Load the 

second weight until the scale stabilizes. 

5.  Press the 

TOTAL

 key. The display will read 

n 002

, 

then display the second loaded weight. 

6.  Repeat a maximum of 999 times.

CHECK THE ACCUMULATION

1.  Press and hold the 

PRINT

 key. Press the 

TOTAL

 key.

2.  Display will read 

n**

, then will show total weight.

  NOTE: There are 8 digits total. The display 

shows the first 4 digits, then the last 4 digits.  
For example, when the first 4 digits displayed 
are "0012" and the last 4 digits displayed are   

 "34.56," the weight is "1234.56."

EXIT ACCUMULATION

1.  When the indicator shows the last 4 digits, press and 

hold the 

TOTAL

 key. The indicator will read 

clr n

. 

2.  Press the 

PRINT

 key to exit. If you want to clear 

the total weight, press the 

ZERO

 or 

TARE

 key. The 

indicator will read 

clr y

.

3.  Press the 

PRINT

 key to clear the total weight and exit 

accumulating mode.

PRINT

1.  If the weight is stable, connect the scale to the 

printer. 

2.  Press the 

PRINT

 key. 

NOTE: While in tare mode, print with tare. If the 
scale shows a negative weight, printing is not 
allowed. 

COUNTING

Use this mode to count parts of uniform weight.

1.  In weighing mode, remove all weight from the 

platform. 

2.  Press the 

COUNT

 key to enter the counting mode.  

PCS 0

 will be shown on the display. 

3.   Press  the 

ZERO

  key  to  change  the  sample  quantity        

 – 5, 10, 20, 50, 100, 200 or 500 units. 

4.  Place the sample quantity of the item being 

counted on the scale platform and press the 

PRINT

key. Sample quantity will be shown on the display.

5.  Place remaining objects on the platform. The total 

quantity will be shown on the display.

6.  Press the 

COUNT

 key to return to weighing mode.

7.  To weigh different weights, at weighing mode, put 

the item on the scale and press the 

COUNT

 key. The 

indicator will read 

0

. 

8.  Press and hold the 

COUNT

 key. Press the 

ON/OFF

 key. 

The indicator will show 

PCS 0

. 

9.  Press the 

ZERO

 key and input the sample quantity. 

10.  Press the 

PRINT

 key to enter. Repeat steps 2 and 3.