8 of 62
0319 IH-1679
III. HANDLE INSTALLATION
1. Remove handle from protective
wrapping.
2. Loosen set screw (140) on crank link
(139H). (See Figure 7)
3. Remove 3 hex screws (H109) and 3
spring washers (H110) from bottom of
handle.
4. Feed Wire, Chain and Pin (H107) on
bottom of handle through center of
base (103) and axle (109). (See Figure 8)
5. Attach handle to base (103) using 3
hex screws (H109) and 3 spring washers
(H110) and tighten with Hex Wrench
provided. (See Figure 9)
6. While raising crank link (139H), slide pin
of rod and chain (H107) into crank link
groove. (See Figure 10)
REFERENCE PARTS DIAGRAMS
PAGES 16-19
Set Screw
(140)
(139H)
Axle
(109)
H107
103
Hex
Screw
(H109)
(103)
Spring
Washer
(H110)
Crank
Link
(139H)
H107
ASSEMBLY INSTRUCTIONS CONTINUED
Figure 7
Figure 8
Figure 9
Figure 10
Summary of Contents for H-1679
Page 4: ...4 of 62 0319 IH 1679 LCD DISPLAY Low Battery Symbol Net Weight Mode Weighing Units...
Page 24: ...24 of 62 0319 IH 1679 PANTALLA LCD S mbolo de Bater a Baja Modo Peso Neto Unidades de Pesaje...
Page 45: ...45 of 62 0319 IH 1679 AFFICHAGE ACL Indicateur de d charge Mode poids net Unit s de pesage...
