PAGE 15 OF 19
1015 IH-2812
SET PASSWORD CONTINUED
CHANGE THE FIRST TWO DIGITS
1. In this example, press
CHANGE
until the first two
digits are "
12
."
2. Press
SET
.
3. The flashing changes to the last two digits.
(See Figure 49)
CHANGE THE LAST TWO DIGITS
1. In this example, press
CHANGE
until the last two
digits are "
34
."
2. Press
SET
. (See Figure 50)
ENTER PASSWORD
Once the password is set, you must enter
the current password before changing any
settings.
1. Press
SELECT
twice.
2. The numbers "9999" are displayed and the first two
digits flash. (See Figure 51)
SET THE FIRST TWO DIGITS
1. In this example, press
CHANGE
until the first two
digits are "
12
."
2. Press
SET
.
3. The flashing changes to the last two digits.
(See Figure 52)
SET THE LAST TWO DIGITS
1. In this example, press
CHANGE
until the last two
digits are "
34
." (See Figure 53)
2. Press
SET
twice.
CANCEL THE PASSWORD
The code "0000" must be entered to cancel password
activation.
RESET FACTORY DEFAULT SETTINGS
Press the reset switch with a pointed object to return all
settings to the factory default settings. Refer to Press Reset
Button below. Refer to Factory Default Settings on page 16.
All custom settings will be deleted and will
revert to the factory default settings when
the reset button is pressed. (See Figure 54)
OPERATION CONTINUED
Figure 49
Figure 50
Figure 51
Figure 52
Figure 53
Reset Button
Press Reset Button
Figure 54
