PAGE 5 OF 15
0621 IH-3845
ASSEMBLY INSTRUCTIONS FOR ADD-ON UNIT CONTINUED
Figure 9
Figure 10
2. Attach the support braces to the Starter Unit using
1/2" hex head bolts, 1/2" lock washers and 1/2" nuts.
(See Figure 9)
NOTE: In order to attach support braces to
Starter Unit, remove 1/2"
hex head bolts,
1/2" lock washers and 1/2"
nuts from the end
of the Starter Unit closest to the Add-On Unit.
Reattach bolts, washers and nuts through both
Starter Unit and Add-On Unit support braces.
3. Attach the arms in the desired location using the pin
and pin lock. Arms adjust in 3" increments.
(See Figure 10)
1-800-295-5510
uline.com
