U-Line H-3895 Assembly Download

Page: 1 / 3

PAGE 1 OF 3

0714 IH-3895

MOBILE GRAVITY
BIN ORGANIZER

1-800-295-5510

uline.com

RACK PARTS LiST

Brace x 2 (1 Set)

Upright x 2 (1 left, 1 right)

2 racks included. Each carton contains:

Crossbeam x 1

Shelf x 8

Locknut

Bolt x 48

RACK ASSEmbLy

1. Attach the crossbeam to one of the uprights using

3 bolts and 3 locknuts. Make sure that the back

lip of the upright is facing inside. Repeat for the

second upright. (See Figure 1)

Figure 1

TooLS nEEdEd

Phillips

Screwdriver

Flat Head

Screwdriver

10mm

Wrench

11mm

Wrench

Summary of Contents for H-3895

Page 1: ...luded Each carton contains Crossbeam x 1 Shelf x 8 Locknut Bolt x 48 rack assembly 1 Attach the crossbeam to one of the uprights using 3 bolts and 3 locknuts Make sure that the back lip of the upright...

Page 2: ...at for remaining 7 shelves See Figure 2 3 Attach 1 brace diagonally to the back of the unit using 2 bolts and 2 locknuts See Figure 3 4 Tighten all bolts 5 Assemble the second rack following steps 1 t...

Page 3: ...o the upright of one of the racks using 4 bolts and secure with nuts Repeat for upright on opposite side of the rack See Figure 6 NOTE There may be hardware left over after assembly as this mobile bas...