PAGE 2 OF 6
0621 IH-4871
MOUNTING
WALLS WITH 2 X 4" STUDS
Mount cabinet securely to studs using four #10 x 1¼"
wood screws installed through mounting holes in
cabinet.
SHEETROCK
Mount 3/4" board to the wall using 3/16" toggle bolts.
Height and width of the board is dependent on cabinet
size. The board should extend a minimum of two inches
beyond all sides of the cabinet. Mount cabinet to
board using four #10 x 1" wood screws installed through
mounting holes in cabinet.
CINDERBLOCK OR CEMENT
Mount cabinet using four 1/4" toggle bolts or #10
masonry lead screw expansion anchors installed
through mounting holes in cabinet.
CONCRETE OR TILE WALL
Mount cabinet using four #10 masonry lead screw
expansion anchors installed through mounting holes in
cabinet.
STEEL POSTS OR BEAMS
Special tools and fasteners are required. Please use
professional service company to mount cabinet.
(Back of Cabinet)
3/16" Mounting Holes
1-800-295-5510
uline.com
