0621 IH-5164
PAGE 1 OF 12
1-800-295-5510
uline.com
FOLDING PICNIC
TABLE – 6'
H-5164
PARTS INCLUDED
Leg Assembly x 2
Leg Brace Assembly x 2
Tabletop x 1
Bench Seat x 2
Screw x 8
Bolt x 4
Locknut x 4
Sliding End Cap x 8
TOOLS NEEDED
Power Drill
3/8" Wrench x 2
Figure 1
ASSEMBLY
Phillips Head
Drill Bit
NOTE: Two people are required to assemble this
table. Assemble table on level ground.
1. Lay the tabletop upside down on the ground. Use
the drill to remove the five screws connecting one of
the tabletop channels to the tabletop, and remove
the channel from the table top. (See Figure 1)
NOTE: Do not use a hand screwdriver for this step.
Remove all screws connecting the tabletop
channel to the table top. Save screws for later
use during assembly.
Tabletop Channel
Screws
Para Español, vea páginas 5-8.
Pour le français, consulter les pages 9-12.
