PAGE 1 OF 9
0521 IH-5598
1-800-295-5510
uline.com
IGLOO PARTY BAR
H-5598
PARTS
INSTALLATION
Lid x 1
Rigid
Caster x 2
Long Screws
Mounting
Bracket
Cooler
Locking
Caster x 2
Caster Mounting
Hardware x 16
Bottle
Opener x 1
Short
Screw x 2
Long
Screw x 2
Cap Catch
Bin x 1
Mounting
Bracket x 1
Cooler x 1
Base x 1
1. Remove two short screws and bottle opener from
bag. Line up the bottle opener with the two most
upper holes. Using the Phillips screwdriver, tighten
the short screws into the cooler. (See Figure 1)
NOTE: The holes are not pre-cut, but are
marked with indentations in the cooler wall.
2. Attach mounting bracket to cooler wall using the two
long screws. Make sure mounting bracket is upright
(See Figure 1)
NOTE: The holes are not pre-cut, but are
marked with indentations in the cooler wall.
Wrench
Phillips
Screwdriver
TOOLS NEEDED
Figure 1
Short
Screws
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
